OE-2.2APF Single Stage Screw Compressor with 3/4'' Standard Port, 750×600×650mm Compact Design and 61kg Lightweight Main Unit

Model OE‑2.2APF single‑stage screw compressor supplies 4 matched flow‑pressure tiers: 0.19‑0.43m³/min @7.5bar(g), 0.18‑0.39m³/min @8.5bar(g), 0.15‑0.34m³/min @10bar(g), 0.14‑0.3m³/min @13bar(g). Buyers can select proper specs based on on‑site air demand and pipeline operating pressure. Both vent port and main pipeline adopt industry‑standard 3/4'' ports for direct hookup with existing air piping without custom adapters. Cabinet dimension reaches 750×600×650mm; the standalone main unit weighs 61kg, the full assembly with auxiliary fittings totals 156kg. Its compact footprint fits standard floor load capacity and basic lifting hardware for easy rigging. Low‑vibration single‑stage screw rotor design delivers steady pneumatic air supply for ceramic plants, food processing workshops and lithium material production sites. We export a full lineup of magnetic separators including grille magnets and slurry iron removers, providing bundled export packages combining air compressors and magnetic sorting hardware.

Besides manufacturing diversified magnetic separation hardware, our company supplies standardized OE‑series single‑stage screw compressed air equipment. OE‑2.2APF is the mass‑produced compact screw air compressor engineered for small and medium‑scale manufacturing facilities. Four graded flow‑pressure tiers widen application flexibility according to fluctuating air consumption and pipeline pressure limits. The 7.5bar(g) tier suits high air‑flow pipelines with low operating pressure; the 8.5bar(g) and 10bar(g) variants serve regular mid‑scale production demand; the top 13bar(g) grade is designed for high‑pressure piping systems with limited instantaneous air draw. Tiered specification selection eliminates costly pipeline pressurization or pressure reduction retrofits to adapt to cross‑industry pneumatic supply requirements. All piping ports follow mainstream industrial 3/4 inch sizing. Project contractors can connect standard off‑the‑shelf pipe fittings directly on‑site without bespoke transition adapters to shorten field piping construction lead time. The cabinet footprint measures 750mm × 600mm × 650mm. The bare compressor unit weighs 61kg, while the complete assembly with base frame and piping accessories hits 156kg. Moderate overall weight enables deployment inside multi‑story workshops and space‑restricted production bays under standard floor load constraints. Proven single‑stage screw rotor geometry lowers operational vibration and running noise without disrupting regular shop‑floor manufacturing activities. Graded pressure sealing architecture minimizes compressed air leakage, delivering dependable continuous pneumatic power for automatic drain valves fitted on slurry magnetic separators, process pneumatic clamps inside food workshops and conveying control valves deployed within lithium raw material production lines. Every unit undergoes hydraulic leak tightness testing, outlet airflow calibration and no‑load rotor endurance inspection prior to shipment. Custom flange fittings can be fabricated for cross‑border shipments conforming to regional piping codes. Turnkey bundled export solutions pairing screw compressors with our full portfolio of dry and slurry magnetic separators are available for bulk distribution toward global small‑scale processing operators.

Q1: How many flow‑pressure rating tiers does the OE‑2.2APF single‑stage screw compressor include, what are the concrete numerical parameters? A1: Four tiers in total: ①0.19‑0.43m³/min @ 7.5bar(g); ②0.18‑0.39m³/min @ 8.5bar(g); ③0.15‑0.34m³/min @ 10bar(g); ④0.14‑0.3m³/min @ 13bar(g). Q2: What are the piping port standard, cabinet dimension and two sets of weight metrics of the compressor? A2: Both vent outlet and main pipeline adopt universal 3/4 inch sizing; cabinet outer dimension is 750×600×650mm; bare main unit net weight stands at 61kg, the fully assembled unit equipped with all auxiliary hardware weighs 156kg. Q3: What tangible on‑site project perks do tiered flow‑pressure specifications bring throughout equipment selection & piping construction? A3: Ratings match pre‑existing pipeline pressure and factory air consumption patterns to cut material and labor outlay for piping pressure adjustment retrofits. Universal standard ports remove the requirement for custom fabricated adapters to shorten on‑site piping construction duration. Q4: What site layout constraints and industrial pneumatic supply use cases fit this compact single‑stage screw compressor model? A4: Its compact footprint imposes mild floor load prerequisites, ideal for cramped low‑headroom small workshops. It delivers reliable instrument and actuator air supply for ceramic processing plants, food formulation workshops and lithium iron phosphate precursor manufacturing lines. Q5: Apart from screw air compressors, what magnetic separation hardware can your firm provide for bundled project delivery? A5: We manufacture permanent drawer grille magnets, rotary grille magnets, dry powder electromagnetic separators, slurry electromagnetic separators, drum separators and eddy current separators, supporting integrated turnkey export packages combining compressors with magnetic sorting systems.